Description:
LIEYANKEJI PL1500L rock drilling machine is a highly efficient rock drilling machine suitable for all kinds of hard rock square mining projects, to solve the hard rock efficient and environmental protection mining solutions
Equipped with advanced 30KW hydraulic rock drill
The two-stage pressurization split cylinder increases the splitting force by 85% compared to the single-stage cylinder
Articulated swinging drill frame, the overall structure is firm and stable
Application conditions: mining, foundation engineering, water conservancy engineering.
Product Introduction:
PL1500 model Rock drilling and splitting machine is mounted on (36T-48T) excavators for use in various hard rock square mining projects, to solve the hard rock efficient and environmentally friendly mining program. Make full use of its power and super mobility, can be applied to a variety of outdoor complex working conditions, original L-type triangular swing articulated structure, stable structure, durable, can be adapted to various angles of construction, easy to disassemble and easy to transport, back-mounted circuitry and hydraulic system is convenient for overhaul and maintenance and other features. The equipment is operated by a multi-channel and highly reliable wireless remote control.
Product Features:
hydraulic rock drilling and splitting machine have fast drilling speed, large splitting force, and flexible movement of the whole machine.
It can work on any working face from various angles and can effectively cope with various complex construction environments.
Unlike other stand-alone rock splitting mounted on an excavator, it does not require an additional rock drill to pre-drill the hole.
One excavator can complete the rock drilling and splitting operations. This saves the costly use of a rock drill.
There is no need to frequently move the equipment during work, which greatly improves rock breaking efficiency.
Using 30KW hydraulic rock drill, the first rock drilling, and then use the P280 two-stage pressurized super splitter into the hole splitting, so as to achieve the effect of efficient rock static blasting. Its high efficiency hydraulic rock drill fully embodies the high economic drilling costs, hydraulic drive air compressor using excavator hydraulic drive, more stable than the traditional (diesel-driven independent air compressor), lower maintenance costs, better economy. Splitting blocks are made of imported alloy forging material through advanced heat treatment process to make them more durable.
Rock drilling and splitting machine efficiency
Drilling approx. 2.5 min. splitting approx. 40 sec.
Side-swinging and positioning approx. 50 sec. min.
Output per hole (theoretical)
2.8m (horizontal spacing) x 1.6m (vertical spacing)
x 1.25m (splitting depth) = 5.6m³.
Daily output (8 hours)
5.6m³(per hole) x 120 holes/day = 672m³
Product Parameters:
|
Rock Drill Parameters
|
|
Power (output) |
30kW
|
|
Drilling hole diameter:
|
Φ135mm
|
Drilling depth |
1900mm |
| Drilling speed |
0.8m/min |
Operating noise |
In line with GB 19872-2005 |
| Splitter parameters |
|
Splitting depth |
1250mm |
| Splitting force (two-stage pressurization) |
15000T |
Rotation angle: |
120° |
| Air compressor/vacuum cleaner Parameters: |
|
Discharge volume: |
7.5m³/min |
| Discharge pressure: |
5-8bar |
Number of filter elements: |
8P |
| Push beam/side swing Parameters: |
|
Maximum thrust of rock drilling |
40KN |
| Maximum pulling force for splitting: |
80KN |
Remote control Parameters: |
|
| Side swing speed: |
1rpm |
Number of digital points: |
30 |
| Effective range: |
50m |
Anti-interference capability: |
>50dB |
| Number of analog channels: |
14 |
Total weight: |
6T |
| Complete machine Parameters: |
|
Overall width: |
1520mm |
| Total length: |
4950mm |
Excavator requirements: |
36-48T |
| Leveling height: |
1860mm |
|
|
