Lieyankeji PL2000L Integrated Hydraulic Rock Drill and Splitter

Lieyankeji PL2000L Integrated Hydraulic Rock Drill and Splitter

Model No.︰PL2000L

Brand Name︰Lieyankeji

Country of Origin︰China

Unit Price︰US $ 135000 / set

Minimum Order︰1 set

Inquire Now

Product Description

Description:

LIEYANKEJI PL2000L rock drilling machine is a highly efficient rock drilling machine suitable for all kinds of hard rock square mining projects, to solve the hard rock efficient and environmental protection mining solutions
Equipped with advanced 35KW hydraulic rock drill
The P300 three-stage supercharger can supercharge the splitter twice
Articulated swinging drill frame, the overall structure is firm and stable
Application conditions: mining, foundation engineering, water conservancy engineering

 

Product Introduction:

The PL2000 model Rock drilling machine for blasting is mounted on (48T-65T) excavators for use in a variety of hard rock square mining projects, to solve the hard rock efficient and environmentally friendly mining program. Use all of its power and exceptional mobility; it can be used in a range of challenging outdoor working environments; its original L-type triangular swing articulation structure is a stable and durable structure that can be adjusted to a variety of construction angles; it is also lightweight and portable; its backpack circuit and hydraulic system make it easy to overhaul and maintain, among other features. An extremely dependable wireless remote control with several channels is used to operate the equipment. To obtain the impact of high-efficiency rock static blasting, a 35KW hydraulic rock drill is used for the initial rock drilling. After that, the P300 three-stage pressurization system is used to pressurize the ultra-strong splitter twice into the hole splitting process.

With an excavator's hydraulic drive, its high-efficiency hydraulic rock drill fully reflects the high economic cost of drilling. Its hydraulic drive air compressor is more stable than a standard diesel-driven independent air compressor, requires less maintenance, and is more economical. In order to increase their durability, splitting blocks are produced from imported alloy forging material using an advanced heat treatment procedure.

Product Features:

Hydraulic booster

The two chambers of the piston (plunger) in the two-stage pressurized cylinder are not equal to the region of action, converting low-pressure hydraulic components into ultra-high-pressure ones on the basis of adding a supercharger. Consequently, the issue of the rock not separating with enough force is resolved.

Rock Drilling and Splitting Machine -- is the result of extensive research and development into rock science and technology for the production of rock drilling and blasting equipment.
There has always been a challenge for hard rock builders with mining, Civil Air Defense projects, municipal transport engineering, safe, efficient, and economical rock mining without explosives, and the state's stricter demands for environmental protection and safety as the total amount of construction in cities rises.
This equipment's invention successfully addresses the mining issue in various construction scenarios.

Efficiency of rock drilling and splitting machine
Approximately 3 minutes for drilling, 40 seconds for splitting, and
Side-swinging and positioning about 1 minute.

Output per hole (theoretical)
3m(horizontal spacing) x 2m(vertical spacing)
x 1.5m (splitting depth) = 9m³.

Daily output (8 hours)
9m³(per hole) x 120 holes/day = 1080m³

Product Parameters:
 

Rock Drill Parameters   Power (output)

35 kW

Drilling hole diameter:

Φ152mm

Drilling depth 2100mm
Drilling speed 0.7m/min

Working noise

In line with GB 19872-2005
Splitter parameters   Splitting depth

1500 mm

Splitting force (two-stage pressurization)

30000 T

Rotation angle: 120°
Air compressor/vacuum cleaner Parameters:   Discharge volume:

10m³/min

Discharge pressure: 5-8bar Number of filter elements: 8P
Push beam/side swing Parameters:   Maximum thrust of rock drilling 40KN
Maximum pull-out force for splitting 80KN

Max. drawing force of splitting 

80KN

Side swing speed

1rpm

Remote control Parameters

 

Effective range

50m

Number of digital points

30

Number of analog channels

14

Anti-interference capability

>50dB

Machine Parameters

 

Total weight

6.5T

Total length

5570mm

Overall width

1520mm

Leveling height

1860mm

Excavator requirements

48-65T

Payment Terms︰ T/T

Product Image